Blue Knight Trading

Maintenance of the Dry flow Foam Filter

1) Foam filter should be cleaned every 20,000km to 30,000km.
2) Foam filter should be removed from the Capsule housing with care.
3) Wash the foam filter with detergent / hand soap in lukewarm water. Avoid twisting and wringing the foam filter while cleaning. Gently squeeze it in your palm until it is clean.
4) Run it under a tap till no soap remains. Second cleaning is required if necessary.
5) Shake it dry to remove excessive water in the form filter.
6) Wrap in dry towel to absorb the water in the form filter.
7) Replace the foam filter back into the Capsule housing.
8) With proper care in cleaning, each foam filter can last for at least 50 cleanings.

Maintenance of the Capsule Filter housing

1) Capsule Filter housing requires no cleaning unless it is very dirty.
2) Clean the exterior of the Capsule Filter housing with a wet soft cloth.
3) Do not clean the internal of the Capsule Filter.
4) Dry the exterior with a dry cloth.
5) Re-install only when the Capsule housing is completely dry.